PB8-04 Male Branch Tee - 8mm Tube OD x PT 1/2

PB8-04 Male Branch Tee - 8mm Tube OD x PT 1/2

Join two equal-size pneumatic tubes inline and connect the perpendicular male-thread branch to a matching equipment port. Match both tube outside diameters and the nominal thread. The fitting is a junction, not a shut-off valve.

Included in one sales unit

1 complete assembled PB male-branch tee with two blue release collars and its brass threaded base. Tubing, equipment, tools and storage boxes are not included.

Original supplier PB series photographs: M5 and pipe-thread structures shown separately. Appearance and proportions vary with the selected size; photos are series references. The selected tube OD, thread and dimensions are listed below.

Model & Reference Codes

Approximate supplier PB dimensions use the A/B/H1 axes in the original diagram. Nominal pipe-thread size is not a measured hole diameter. Confirm the mating port before installation.

Connect and inspect.

Isolate and fully depressurize. Match tube OD and the actual female equipment-port thread. Tighten the brass threaded base at its hex using a suitable sealing method for that connection; do not turn the plastic body or blue collars as a wrench. Cut compatible tubing square, remove debris and insert both tubes fully. Pull gently to check retention. Restore air gradually and leak-check all three connections. Before removing a tube, depressurize, press its collar and withdraw it.

Pack quantities

Choose 1 / 5 / 20 identical complete fittings per pack. Quantity counts packs. Displayed pack prices include the shown savings.